5
INSTALLATION
MOUNTING ON THE WALL
This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 100mm x
100mm mounting kit designed for fl at-panel TVs (sold separately). Mount this unit according to the
directions included with the mounting kit.
REMOVING THE BASE STAND
WARNING: The LCD Display is very fragile, and must be protected at all times when removing
the base stand. Be sure that no hard or sharp object, or anything that could scratch or damage the
LCD display, comes into contact with it. Do NOT place pressure on the front of the unit at any time
because the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2. Lay the unit down on a fl at surface, so the back side is facing up, making sure to place a soft
cushioned material (such as a pillow or thick piece of foam) beneath the screen.
3. Remove the four screws and then remove the BASE STAND from the TV.
Four mounting
holes
(size M4 screw)
ASTV3619WS-HDMI_E2-10.indd 5
ASTV3619WS-HDMI_E2-10.indd 5
8/13/2007 12:10:06 PM
8/13/2007 12:10:06 PM
