The indicator light next to the ON/OFF switch
flashes red while the speaker is charging
and turns solid red when the speaker is fully
charged.
Note: There are indicator lights inside the
speaker’s charging compartment also. They
flash green while the speaker is charging and
turn solid green when the speaker is fully
charged.
Each earbud’s indicator light turns solid red
when the earbud are charging. The light turns
off when each earbud is charged.
1. Charge the speaker
and earbuds
IMPORTANT: The speaker and earbuds must
be charged before you use them for the first
time.
Open the door on the back of the speaker
and place the earbuds inside their charging
compartments as shown below. Then close
the door.
Insert the provided charging cable into the
charging jack on the side of the speaker. Plug
the other end of the charging cable into a
USB power source (like a computer or a USB
charger).
2. Pair the earbuds with
your phone
To turn on the earbuds: Open the speaker
door and take the earbuds out. The earbuds
automatically turn on. The earbud indicator
lights flash red and blue, and the earbuds
announce “Power on.”
Note: If the earbuds do not
automatically turn on when
you take them out of the
case, press and hold the back
of each earbud as shown
here to turn it on manually.
Enable Bluetooth on your smartphone or other
device.
Choose
E5 from the pairing options on your
smartphone. (If it’s not in the list, choose
“Scan” from your phone’s Bluetooth menu.)
The earbuds announce “Connected” when the
process is complete.
3. Pair the speaker with
your phone
To turn on the speaker: Put the ON/OFF
switch on the side of the speaker in the ON
position. If you haven’t already paired a device
with the speaker, the indicator light next to
the ON/OFF switch starts flashing blue—this
means the speaker is ready to pair.
Enable Bluetooth on your smartphone or other
device.
Choose
BT01 from the pairing options on
your smartphone. (If it’s not in the list, choose
“Scan” from your phone’s Bluetooth menu.)
The indicator light next to the ON/OFF switch
turns solid blue when the speaker is connected
to your phone.
Note: This indicator flashes blue when you
play music through the speaker.
IMPORTANT: Open the speaker and take both ear
buds out at the same time when pairing. Otherwise,
they might not pair with your phone properly.