Using the earbuds and
speaker
Charging and storing your earbuds
The earbuds beep continuously when they need
to be recharged.
To recharge the earbuds: Open the door on
the back of the speaker and put the earbuds
back in their charging compartments. They
turn off automatically when you put them in
their charging compartments.
IMPORTANT: If the speaker has run out
of charge, the earbuds do not turn off or
disconnect automatically. Turn the earbuds off
manually (see Using the Earbuds) and recharge
the case.
Using the earbuds
To turn the earbuds on/off
manually: Press and hold the
back of either earbud until you
hear the “power on” or “power
off” prompt.
To answer or end a phone
call: Press the back of either earbud.
To decline a phone call: Press and hold the
back of either earbud for 2 seconds.
To play/pause music: Press the back of
either earbud.
To go to the next song: Double press the
back of the right earbud.
To go to the previous song: Double press the
back of the left earbud.
To use your phone’s voice assistant: Triple
press the back of either earbud.
IMPORTANT: The earbuds and speaker
connect separately to your phone or other
Bluetooth device. To listen with the speaker,
choose BT01. To listen with the earbuds,
choose E5.
IMPORTANT: Not all phones support playback
control and phone answer/end control. Check
your phone’s user manual for more information
if you’re having trouble with these functions.
Tour of the earbuds and
speaker
Earbud microphone
Multi-function button (for
calls, music playback,
turning off manually, etc.)
Speaker battery
indicators
Earbud indicator light
Speaker power switch
Charging port
Speaker
clip
Speaker
Earbud charging
compartments
Quick
S t a r t
Guide
ARTWS30 QSG 02
DUO WIRELESS
SPEAKER
EARBUDS
ALL-IN-ONE
Speaker Bluetooth and
charging indicator
To reset the earbuds to their factory
settings: Make sure the earbuds are not
connected to your phone or other Bluetooth
device (you might need to turn your phone’s
Bluetooth off temporarily). Then press the
back of either earbud five times to reset.
The earbuds beep four times. Follow the
instructions in step 2 to pair the earbuds with
your phone again.