background image

2

1.    WELCOME

Thank you for purchasing this system!    This 2.4GHz stereo digital headphone
system  offers  you  advances  in  wireless  transmission  technology  with  built-in
noise cancelling feature in which you can listen to ultra stereo sound from your

audio  components.      The  universal  transmitter  dongle  is  compatible  to  any
audio sources, say DVD player, CD player, i-pod, i-phone, MP3, TV set, VCR,
Hi-Fi  system  or  radio.    Line-In  Jack  on  headset  can  also  work  as  a  wired

headset.

2.    FEATURES

2.4GHz FHSS Digital technology

High quality stereo sound that is virtually interference-free

Transmission is not restricted solely to line of sight

Noise Cancelling Feature on Headphone

Digital Pairing System on Headphone & Transmitter

Electronic Volume Control on Headphone

Built-in Rechargeable Lithium Battery pack in Dongle and Headphone

Auto Shut-off on Headphone

Auto On/Off RF function on transmitter

3.5mm Line in feature for corded headphone application

Operating distance up to 15 feet

Airplane audio adapter

3.    PACKAGING

RF receiver headphone

RF dongle transmitter

Power adapter with

USB charging cable with 2x charging ports

3.5mm to 3.5mm audio cable

Airplane audio adapter

Travel Case

Instruction manual

Summary of Contents for DH1080









Reviews: