Chapter 4 Award BIOS Setup / 65
Standard CMOS Features
Frequency/Voltage Control
Advanced BIOS Features
Load Fail-Safe Defaults
Advanced Chipset Features
Load Optimized Defaults
Integrated Peripherals
Set Supervisor Password
Power Management Setup
Set User Password
PNP/PCI Configuration
Save & Exit Setup
PC Health Status
Exit Without Saving
Esc : Quit F9 : Menu in BIOS
←→↑↓
: Select Item
F10 : Save & Exit Setup
Time , Date , Hard Disk Type ...
4.12 Set Supervisor / User Password
◎
◎
◎
◎
◎
Figure 12. Set Supervisor / User Password
CMOS Setup Utility-Copyright(C) 1984-2000 Award
Software
Enter Password:
When you select this function, the following message will
appear at the center of the screen to assist you in creating a
password.
Enter Password
Type the password,up to eight characters,and press <Enter>.
The password you type now will clear any previously entered
password from CMOS memory. You will be asked to comfirm
the password. Type the password again and press <Enter>.
You may also press <ESC> to about the selection and not
enter a password.To disable password, just press <Enter>
when you are prompted to enter password. A message will
comfirm that you wish to disable the password. Once the
password is disabled, the system will boot and you can enter
setup freely.
