Chapter3 Installation / 19
1.
PS/2 Keyboard port
This connection is for a standard keyboard using an PS/2 plug
(mini DIN) . This connector will not allow standard at AT size
(large DIN) keyboard plugs. You may use a DIN to mini DIN
adapter on standard AT keyboards.
2.
PS/2 Mouse port
This system will direct IRQ12 to PS/2 mouse.
3.
Serial Port COM 1 and COM 2 port
The one serial ports can be used for pointing devices or other
serial devices. See "Onboard Serial Port" in chipset Feature Setup
of the BIOS SOFTWARE.Serial port COM 2 Header
(1-10pin)
.
NOTE:
Serial {D-type 9pin (F) } must be connected to the
serial port.
4.
Parallel Printer port
You can enable the parallel port and choose the IRQ through "
Onboard Parallel Port" in Chipset. Feature Setup of the BIOS
SOFTWARE.
5.
- Universal Serial BUS Ports 1,2
Two USB ports are available for connecting USB devices.
- Universal Serial BUS Ports 3,4
Two USB ports are available on the back panel.Therefore,we
provide a 10 pin ribbon cable with bracket to connect Built-
in on-board USB header.
USB 3,4
1
2
3
4
5
VCC
P0-
P0+
GND
10
9
8
7
6
GND
P1+
P1-
VCC
