manualshive.com logo in svg

Acorp 4D845AP, User Manual, Page: 49 / 74

Share
Download
Acorp 4D845AP User Manual Download Page 49

2-26

2-26

2-26

2-26

2-26

Chapter 2                                    BIOS Setup

Chapter 2                                    BIOS Setup

Chapter 2                                    BIOS Setup

Chapter 2                                    BIOS Setup

Chapter 2                                    BIOS Setup

Suspend Type

Stop Grant (default)

Set Susped type is stop grant.

PwrOn Suspend

Set Suspend type is Power on
Suspend.

Modem Use IRQ

This determines the IRQ, which can be applied in Modem
use.

3 (default)

4/5/7/9/10/11/NA.

Suspend Mode

Disabled (default)

Disabled.

1 min - 1 Hour

Set the timer to enter Suspend
Mode.

HDD Power Down

By default, this is “Disabled”, meaning that no matter the
mode of the rest of system, the hard drive will remain
ready. Otherwise, you have a range of choices from 1 to 15
minutes or Suspend.  This means that you can select to
have your hard disk drive be turned off after a selected
number of minutes or when the rest or the system goes
into a suspend mode.

Disabled  (default)

Disabled.

1 - 15 mins

Enabled.

Soft-Off by PWR-BTTN

Pressing the power button for more than 4 seconds forces
the system to enter the Soft-Off state when the system has
“hung”.

The Choices: Instant-Off

(default), Delay 4 Sec.

Summary of Contents for 4D845AP











































































Reviews:

No comments