manualshive.com logo in svg

Acorp 4D845AP, User Manual, Page: 17 / 74

Share
Download
Acorp 4D845AP User Manual Download Page 17

1-15

1-15

1-15

1-15

1-15

Chapter 1                        Motherboard Description

Chapter 1                        Motherboard Description

Chapter 1                        Motherboard Description

Chapter 1                        Motherboard Description

Chapter 1                        Motherboard Description

ATX Power Switch (PW_BN)

The system power is controlled by a momentary switch

connected to this lead. Pushing the button once will switch

the system ON.

Power LED Lead (PW_LED)

The system power LED lights when the system power is on.

Speaker Connector  (SPEAKER)

The speaker (onboard or offboard) provides error beep code

information during the Power Self-Test when the computer

cannot use the video interface.  The speaker is not connected to

the audio subsystem and does not receive output from the audio

subsystem.

Hard Drive LED Connector  (HD_LED)

This connector supplies power to the cabinet IDE activity LED.

Read and write activity by devices connected to the Primary or

Secondary IDE connectors will cause the LED to light up.

Reset Switch Lead (RESET)

The connector can be connected to a momentary SPST type

switch that is normally open.  When the switch is closed, the

motherboard resets and runs the POST.

Summary of Contents for 4D845AP











































































Reviews:

No comments