manualshive.com logo in svg

Acorn Superglide 130, User Manual

Share
Download
Acorn Superglide 130 User Manual Download Page 3

Acorn Stairlifts User Manual

ENGLISH

3

Thank you for choosing Acorn.

You can rest assured that your stairlift will provide many years of reliable service

and allow you to enjoy the full use of your home.

Your stairlift is covered by a manufacturer’s warranty for 12 months

that covers the cost of replacement parts.

Before using your stairlift, please read

through these instructions carefully.

The Stair lift owner is required to inspect the following functions every 2 months:

General operation of the Stair lift.

The operation of the safety sensors.

Rail and carriage are free of debris.

Once a year, it is mandatory to call your Acorn/authorized dealer to perform the 

annual inspection, that includes all maintenance and safety inspections and 

repairs where necessary. Regular maintenance is essential for keeping your stairlift 

in proper operating condition. 

We strongly recommend that you only use authorized engineers to perform 

all required maintenance, service and repair work.

USA / CANADA ONLY

Some States require that permits are obtained prior to installation,

and that a licensed engineer completes the installation.

Check your local regulatory requirements

IMPORTANT

Ensure that only an authorized and qualified Acorn trained engineer installs and 

services the stairlift.  Under no circumstance should anyone other than an 

engineer trained and authorized to install, adjust, service or modify any 

mechanical or electrical device on this product. Failure to follow this warning 

may result in safety system compromises which could result in serious injury 

or death. Acorn accepts no liability for property damage, warranty claims or 

personal injury, including death, in this circumstance.

After installation reliable operation and continual safe operation requires regular 

service and inspection. As the owner you are responsible for ensuring that regular 

service and inspections occur in a timely manner.

MAINTENANCE

Acorn, in keeping with its policy of continual development, reserves the right to change 

specification without prior notice. All measurements are approximate. All images are 

shown for illustrative purposes only. Product may vary slightly.

Summary of Contents for Superglide 130







































Reviews:

No comments

Brands by name

Popular brands

Load more brands