INSTALLATION, OPERATIONS & MAINTENANCE MANUAL
Please visit
www.acorneng.com
for most current specifications.
ACORN ENGINEERING FIELD SERVICE
TOLL FREE
800-743-8259 •
LOCAL
626-855-4866 •
FAX
626-855-4863
®
MERIDIAN-EDGE MODEL 3802
OPTIONAL ACCESSORY INSTALLATION & ASSEMBLY
Some soaps contain corrosive additives that can cause rust in
soap dispensers. Acorn Engineering Company recommends
user/ maintenance personnel review MSDS reports of soap and
possible corrosive additives noted.
!
WARNING
Rubber
Gasket
Washer
Black end of
Check Valve
Direction
of Flow
3/8" Nut
3/8" O.D.
Tube
Install soap reservoir to wall inside P-Trap
enclosure using mounting brackets provided as
shown. Wall anchors and anchoring hardware
provided by installer.
A.
Install soap filler assembly to deck as shown.
B.
Attach 1-1/4" O.D. refill tube to soap filler
assembly and soap reservoir with provided hose
clamps.
C.
Install soap dispenser(s) onto deck. NOTE:
Gasket and Washer are located beneath the
deck.
D.
Attach 3/8" O.D. Tubing to the dispenser(s) and
reservoir. NOTE: Check Valve must be field
spliced into tubing and installed with respect to
direction of flow.
E.
HINT: For best results install soap
reservoir fill hole directly below soap filler
on deck with refill tube as short and
straight as possible to facilitate refill of
soap without backup or overflow.
Soap Filler Adapter
Ø3/8" OD Tube
Ø1/4" OD Vent Tube
Soap Reservior
Mounting
Bracket
1-1/4"
Date Revised: 08/02/19
Page 12 of 22
Part #: 6216-011-000
