11
REMOTE CONTROL MANUAL
(BUTTON FUNCTION)
:
Fan ON/OFF
Light ON/OFF
Main ON/OFF
(with last state memory)
Light’s Tone Switch
Timer ON/OFF
(press & hold 3sec to cancel)
Forward / Reverse Switch
Natural Wind
Adjust Speed (6 Speeds)
Emitter
2 x AAA
Battery 1.5V
-
IMPORTANT:
1. Insert two size AAA alkaline batteries by matching
and
on the
batteries to the diagram inside the battery compartment of the remote
control.
2. Acorn Remote comes pre-paired from the factory. If your remote loses its
pairing, you can re-pair by turn ‘ON’ the supply power and within 3
seconds press the Emitter button ‘Main ON/OFF
‘ once followed by
Emitter button ‘Timer ON/OFF
‘ once. A long ‘beep’ sound will be
heard if pairing is successful. If pairing failed, turn OFF the supply power
for at least 10 seconds before trying again.
3. When the Emitter cannot control the Receiver, check surrounding for any
existence of similar remote control products. Some interference might
occur when similar radio waves being transmitted.
4. Replace the batteries when found low in voltage as it will affected the
sensitivity of the Emitter.
5. Always remove the batteries from the Emitter when leaving unused for
long period of time.
+
Model: DC-F626
Summary of Contents for DC-325
Page 4: ...FAN STRUCTURE DRAWING 3...