Acorn DC-325, Instruction Manual, Page: 10 / 15

9
INSTALLATION OF LIGHTKIT:
1) Remove one screw from the
motor round piece, unscrew the
other two screws out by 3-4mm.
(fig 10)
2) Attach the lightkit to the fan, fix
the first screw back to the hole
and tighten all the three screws
firmly. (fig 10)
3) Direct plug in the wire to the
lightkit docking (connector).
Carefully attach the acrylic cover
to the lightkit and twist clockwise
until its secured tightly. (fig 11)
4) The finished product as fig 12.
fig 10
fig 11
fig 12