6
Meter Display
Test Result Area:
Indicates test result.
Blood Drop / Strip Symbol:
Wait for the Blood Drop / Strip Symbol to appear
before applying the sample. These two symbols appear at the same time.
Control Solution Symbol:
Indicates a control test result. A pound sign (#) will also
be displayed when control solution symbol appears.
MEM:
Shows a test result stored in memory.
Ketone?:
Appears when the blood glucose concentration is above 300 mg/dl. This
simply suggests that a ketone test is recommended. Consult your doctor about
testing for ketones.
Note
:
This symbol does not mean that the system has detected ketones. It
recommends that a ketone test should be taken.
Hypo Symbol:
Appears when the blood glucose concentration is below the
“Hypoglycemia” (low blood sugar) target level that you have set.
Hyper Symbol:
Appears when the blood glucose concentration is above the
“Hyperglycemia” (high blood sugar) target level that you have set.
Measurement Unit:
Only mg/dl will be displayed on your meter. It cannot be
adjusted.
Battery Symbol:
Warns when you should replace the battery.
After Meal Symbol:
Appears when after-meal test results are displayed.
Before Meal Symbol:
Appears when before-meal test results are displayed.
Test Reminder Symbol:
Appears when reminding you to test blood glucose.
Pound Sign (#):
Appears with the control solution test result or when you mark an
invalid result to prevent it from being included in the average.
Month Day Hour Minutes
Pound Sign (#)
Test Remind Symbol
Before Meal Symbol
After Meal Symbol
Battery Symbol
Measurement Unit
Hyper Symbol
Blood Drop /
Strip Symbol
Memory Ketone Hypo Symbol
Test Result
Area
Control Solution
Symbol