33
Clearing the Memory
Take extreme caution when clearing the memory. This is not a reversible operation.
To clear the memory:
1. With the meter off, press and hold the left (
◄
) button for two seconds. This will
turn on the meter and enter the delete mode.
2. To clear the memory, press and hold both the left (
◄
) and right (
►
) buttons for
two seconds.
3. The display will show “MEM” and “- - -”. After a second, the meter will clear its
memory and turn itself off.
4. If you entered the delete mode but want to exit without deleting the recorded
data, press the right (
►
) button. This will turn the meter off without deleting any
data.
Transferring Records
The meter can transfer stored information to a Windows-based personal computer
(PC) using an optional data transfer cable and software package. To make use of
this feature, you need the
On Call
®
Diabetes Management Software and a USB
data transfer cable from
ACON
.
1. Install the software to your personal computer (PC) according to the
instructions from the
On Call
®
Diabetes Management Software Kit.
2. Connect the USB cable to your PC and plug the audio jack of the cable into the
meter data port. Meter automatically enters “PC” mode.