Acom 500S User Manual Download | Manualshive

Page: 3 / 66

background image

User's Manual | ACOM 500S | 160-4

m Linear Power Amplifier

March 2023

S e c t i o n ABOUT DOCUMENTATION | Page 3 of 66

ABOUT DOCUMENTATION

All ACOM documentation (including manuals, brochures, specifications, descriptions, presentations, video
materials, etc.) are based on the latest available information at the time of creation of our documents.

As  we  always  strive  to  constantly  improve  and  update  our  products,  ALL  PRODUCTS,  PRODUCT
SPECIFICATIONS  AND  DATA  ARE  SUBJECT  TO  CHANGE.  ACOM  reserves  the  right  to  make  changes  and
improvements at any time without further notice or obligation to notify any person or organization of such
revisions  or  changes,  made  in  order  to  improve  the  reliability,  function,  quality  and  design,  and/or
performance of the ACOM products and services.

Further,  this  User

'

s Manual is provided AS IS and ACOM shall not be liable for possible errors contained

herein.

ACOM company creates and distributes its documentation in ENGLISH language only.

Any translations in other languages made by our dealers, partners, distributors, etc. cannot
be related to ACOM company in any way.

ACOM is not liable for non-English documentation correctness in any way.

This manual supersedes all previous editions, which thereby become invalid.

The cover images used in the manual are illustrative only.

We are continuously striving to improve our documentation, but nobody is perfect.

And our documentation is not an exception of this rule.

Have you found any errors or would you like to suggest changes in our documentation?

Please help us by sending your suggestions to the following e-mail address:

[email protected]

The latest versions of our User's Manuals are available at

www.acom-bg.com

We highly recommend you to use this manual in electronic form as PDF-file instead of printed version. The
PDF-file is easy to read on any computer, tablet, smart phone or other similar device. In the PDF file you will
find the necessary information very fast due to context-oriented links (marked in

orange

) inside the file,

including context-linked Table of Content.

To open PDF-files you can use any free PDF viewer, for example:

•

Adobe Acrobat Reader DC (https://get.adobe.com/reader);

•

Foxit Reader (https://www.foxitsoftware.com/pdf-reader);

•

Your web browser. Web browsers like Google Chrome, Firefox and Safari all have integrated
PDF readers.

«
1
2
3
4
5
...
»

Summary of Contents for 500S



































































Reviews:

No comments

Related manuals for 500S

Brand: Takstar Pages: 2

Brand: EarthQuake Pages: 12

Brand: YORKVILLE Pages: 12

Brand: YORKVILLE Pages: 8

Brand: ORANGE Pages: 13

Brand: AMERITRON Pages: 19

Brand: DAPAudio Pages: 16

Brand: Atlas Pages: 24

Brand: MTX Pages: 14

Brand: M2 Antenna Systems Pages: 19

Brand: Rogue Audio Pages: 12

Brand: Qtx Pages: 3

Brand: Monacor Pages: 34

Brand: DaytonAudio Pages: 4

Brand: Luxman Pages: 24

Brand: Cloud Pages: 7

Brand: Marshall Electronics Pages: 1

Sonic Frontiers SFS-40

Brand: Sonic Frontiers Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands