Fixturlaser Laser Kit
Set Up
1.
Mount the
‘S’
sensor on the stationary shaft or
coupling hub
and hand tighten the nut, use the tigtning
tool and tighten further. Turn the sensor on by pressing
the power button.
2.
Mount the
‘M’ sensor on the movable shaft or
coupling hub
and hand tighten the nut use the titning
tool and tighten further. Turn the sensor on by pressing
the power button.
Tighten the nut
Press the power button
Start the Laser Kit App
1.
Click on the Fixturlaser Laser kit app on your device
that starts the application.
2.
The app will search for the sensor and connect to
them via Bluetooth. This will take between 5 to 15
seconds.
3.
The lasers will turn on.
