33
←
Date and time
←
Set revolution speed
←
Background noise
←
Result of “Measurement 1” in 1
st
place after the decimal point.
←
Result of “Measurement 2” in 1
st
place after the decimal point.
←
Result of “Measurement 3” in 1
st
place after the decimal point.
←
Calculation result of “Measurement 1”,“Measurement 2” and
“Measurement 3” in integer.
Example of print
④
Return to stand-by screen after the printing
7-8 Printing method
1) Printing will be started automatically at the time of the completion of the measurement.
Calibration result can also be printed.
2) If printing is necessary again, press “Print” switch to print the result of measurement made
immediately before.
3) If there is no measurement data exists, “!! No Data !!” will be displayed.
4) During the printing, if the printing paper is not installed correctly, such as no printing paper
or the lid is open, “!! Paper End !!” will b displayed. Set the printing paper correctly, and
press “Print” switch again.
* Make sure that the tip of the paper is outside of the cover. For the method for the setting
of the printing paper, see Para. 6-4.
To stop the printing, press “Function” and “SET” switches at the same time.
When the printing is stopped, “!! No Data !!” will be displayed and it is not possible to re-
print.
7-9 Printing paper feeding method
1) Press “Function” switch.
2) Press “Feed” switch to feed the printing paper.
