Acnodes RMC 7132 User Manual Download

Page: 7 / 98

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 7132

1U Rackmount System

Connecting the Control Panel ......................................................................... 25

5-4

I/O Ports ........................................................................................................... 26

5-5

Installing the Processor and Heatsink.............................................................. 27

Installing an LGA1366 Processor......................................................................27

Installing a Passive CPU Heatsink....................................................................28

Removing the Heatsink......................................................................................29

5-6

Installing Memory Modules................................................................................ 30

Installing & Removing DIMMs........................................................................... 30

Memory Support..................................................................................... 31

5-7

Adding PCI Expansion Cards ......................................................................... 32

5-8

Serverboard Details ........................................................................................ 33

X8STi Quick Reference..........................................................................................34

5-9

Connector Definitions ...................................................................................... 35

Main ATX Power Supply Connector .................................................................35

Processor Power Connector.............................................................................35

External Power Connector .............................................................................. 35

Power Button .................................................................................................... 35

Reset Button...................................................................................................... 35

Power Fail LED .................................................................................................35

Overheat/Fan Fail...............................................................................................36

NIC2 (LAN2) LED...............................................................................................36

NIC1 (LAN1) LED...............................................................................................36

HDD LED/ UID Switch........................................................................................36

Power On LED .................................................................................................. 36

NMI Button.......................................................................................................... 37

Fan Headers...................................................................................................... 37

ATX PS/2 Keyboard and PS/2 Mouse Ports.................................................... 37

Summary of Contents for RMC 7132



































































































Search results

Summary of Contents for RMC 7132

Reviews:

Related manuals for RMC 7132

Brands by name

Popular brands

Acnodes RMC 7132, User Manual

Search results

Summary of Contents for RMC 7132

Reviews:

Related manuals for RMC 7132

Brands by name

Popular brands