4.3 SATA Interface Speed
The system’s SATA controller supports three modes of operations, <Gen1>, <Gen2>
and <Gen3>. Gen 1 SATA mode offers bandwidth throughput of up to 150MB/s; Gen
2 SATA mode offers bandwidth throughput of up to 300MB/s; Gen 3 SATA mode
offers bandwidth throughput of up to 600MB/s. For systems with only
the
mSATA
module installed, Gen 2 is recommended. For systems with
the
2.5” SSD, you can
set this option to Gen2/ Gen3 according to SSD’s specifications.
To set Chipset SATA mode:
1. Press
F2
when the system boots up to enter the BIOS setup utility.
2. Go to
[Advanced]
[SATA Configuration]
.
3. Set the
[SATA Interface Speed]
option to the desired mode.
4. Once set, press
F10
to save setting and exit.
67
Summary of Contents for FES93 Series
