XP-5R Beam
-
17
-
on the display, use UP and DOWN button to select
No
(normal while change color) or
Yes
(blackout while change color), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. Gobo Change
—
Blackout while change gobo
Select
BL.O. Gobo Change
, press ENTER button to confirm, present mode will blink
on the display, use UP and DOWN button to select
No
(normal while changing gobo) or
Yes
(blackout while changing gobo), press ENTER button to store. Press MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
Lamp Setting
Attention: The lamp will not be on unit detected temperature is lower than 45
°
C.
Enter menu mode, select
Fixture Setting
, press ENTER button to confirm, use UP and
DOWN button to select
On/Off, State/Power on, Off Via DMX, On if DMX on, Off if
DMX off, Cooling Mode, Ignition Delay
or
Low Power Delay.
.
On/Off
—
Turn on/off the lamp
Select
On/Off
, press ENTER button to confirm, present mode will blink on the display,
use UP and DOWN button to select
On
(lamp on) or
Off
(lamp off), press ENTER
button to store. Press MENU button back to the last menu or let the unit idle one minute
to exit menu mode.
State/Power On
—
Lamp state while power on
Select
State/Power On
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
On
(Lamp on while power on) or
Off
(Lamp
off while power on), press ENTER button to store. Press MENU button back to the last
menu or let the unit idle one minute to exit menu mode.
Off Via DMX
—
Turn off the unit via DMX controller
Select
Off Via DMX
, press ENTER button to confirm, present mode will blink on the
display, use UP and DOWN button to select
Yes
(turn off the unit via DMX controller
available) or
No
(turn off the unit via DMX controller impracticable), press ENTER
22-
to select
Yes
(the unit will run built-in program to reset zoom, frost and frost to their
home positions)
or
No
, press ENTER button to store. Press MENU button to exit.
All
—
Reset All
Select
All,
press ENTER button to confirm, use UP and DOWN button to select
Yes
(the unit will run built-in program to reset all motors to their home positions)
or
No
,
press ENTER button to store. Press MENU button to exit.
Special Functions
Enter menu mode, select
Special Functions
, press ENTER button to confirm, use UP
and DOWN button to select
Fixture Maintenance
or
Factory Setting.
Fixture Maintenance
Select
Fixture Maintenance
, press ENTER button to confirm, use UP and DOWN
button to select
Interval
or
Remain Time
.
Interval
Select
Interval,
press ENTER button to confirm, the interval time will show on the
display. Press MENU button to exit.
Remain Time
Select
Remain Time,
press ENTER button to confirm, the remaining time will show on
the display, press ENTER button to confirm, use UP and DOWN button to select
Exit
or
Reset time
, press MENU button to exit.
Factory Setting
Select
Factory Setting
, press ENTER button to confirm, the fixture will reset to factory
settings and exit menu mode.
6.3. Home Position Adjustment
Press
MENU
button into menu mode, then press ENTER button for about 3 seconds into
offset mode to adjust the home position. Select the function by
ENTER
button. Use
UP
and
DOWN
button to choose the submenu, press the
ENTER
button to store and automatically
www.bluelight.at
www.bluelight.at
