ACME XA-500, User Manual, Page: 14 / 24

4.2 Address Setting
If you use a universal DMX controller to control the units, you have to set DMX address from 1 to
512 so that the units can receive DMX signal.
Press the MENU button to enter menu mode, select the DMX Functions , press the ENTER button
to confirm, use the UP and DOWN button to select the DMX Address , press the ENTER button to
confirm, the present address will blink on the display, use the UP and DOWN button to adjust the
address from 0 to 512, press the ENTER button to store. Press the MENU button back to the last
menu or let the unit idle 7 seconds to exit menu mode.
Please refer to the following diagram to address your DMX512 channel for the first 4 units
：
Channel mode
Unit 1
Address
Unit 2
Address
Unit 3
Address
Unit 4
Address
29 Channels 1 30 59 88
31 Channels 1 32 63 94
4.3 DMX 512 Configuration
29 Channels Mode (Mode 1):
CHANNEL VALUE FUNCTION
1
000-255
Pan
0%

100%
2
000-255
Tilt
0%
 100%
3
000-255
Pan/Tilt Speed
Fast
 Slow
4
000-255
Cyan
0%
 100%
5
000-255
Magenta
0%

100%
6
000-255
Yellow
0%

100%
7
000-255
CTO
0%
 100%
8 Color
13A