ACME Warrior Scan 50 LED-SC50C, User Manual

Page: 10 / 10

9-
setup, to go back to the functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one minute to exit the menu mode.
Sound Mode
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (sound on) or
(sound off) mode. Once the mode has been selected, press the ENTER button to setup, to
go back to the functions without any change press the MENU button again. Hold and press
the MENU button about one second or wait for one minute to exit the menu mode.
Sound Sense 0-100
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the
…
mode.
Once the mode has been selected, press the ENTER button to setup, to go back to the
functions without any change press the MENU button again. Hold and press the MENU
button about one second or wait for one minute to exit the menu mode.
Blackout Mode
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (yes blackout) or
(no blackout) mode. Once the mode has been selected, press the ENTER button to
setup, to go back to the functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one minute to exit the menu mode.
Led Display
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (Led on) or
(Led off) mode. Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the
MENU button about one second or wait for one minute to exit the menu mode.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button to
show on the display. Press the ENTER button to change to the mode
10-
(display normal), It will automatically store after 8 seconds. Or press the ENTER button
again return to the mode (display inversion). To go back to the functions press the
MENU button. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Display normal mode for the fixture putting on the floor.
Display inversion mode for the fixture fixing under ceiling.
Pan Inversion
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (normal) or
(pan inversion) mode. Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any change press the MENU button again. Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.
Tilt Inversion
Press the MENU button to show on the display. Press the ENTER button and the
display will blink. Use the DOWN and UP button to select the (normal) or
(tilt inversion) mode. Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any change press the MENU button again. Hold and
press the MENU button about one second or wait for one minute to exit the menu mode.
Self-Test
Press the MENU button to show on the display. Press the ENTER button and the unit
will run self-test by built-in program. To go back to the functions press the MENU button again.
Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
Temperature Test
Press the MENU button to show on the display. Press the ENTER button and the
display will show the temperature of the unit. To go back to the functions press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to
exit the menu mode.
Fixture Hours