DMX Settings
To select
DMX Settings,
press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
DMX Address
,
Channel Mode
or
No DMX Status.
DMX Address
To select
DMX Address
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to adjust
the address from
001
to
509/505/505/504/497
, press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle 30 seconds to exit menu mode.
Channel Mode
To select
Channel Mode
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
4
Channel 8 bit
,
8 Channel 16 bit
,
8 Channel
,
9 Channel 16 bit
or
16 Channel
, press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle 30 seconds to
exit menu mode.
No DMX Status
To select
No DMX Status
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Hold
(fixture continues to obey the last command it received Via DMX if DMX signal stops),
Blackout
(fixture blacks out if DMX signal stops) or
Manual
(the fixture will automatically read the
DMX value in the “Manual Test” menu for operation after selecting this mode), press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle 30 seconds to
exit menu mode.
Fixture Settings
To select
Fixture Settings
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Fan Mode, Dimmer Curve, Dimmer Speed
or
White Balance.
Fan Mode
To select
Fan Mode
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
Auto
or
Silent
, press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the
unit idle 30 seconds to exit menu mode.
11E
Summary of Contents for Thunder
Page 1: ......
Page 11: ...10E ...
