Usage
The power on state of 1/8/16 port KVM switch:
When you power on KVM switch, it will ask you the password, the default password value
is eight zero –“ 00000000 “. Please key in eight zero and enter the same value at retype
field.
Note: Before you are not familiar with the operation of OSD menu, please don’t change the
password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the
password and unfortunately forget the password, you need send it back to your distributor
for maintaining the password.
The Push Buttons
:
Pressing the button cyclically through all the ports.
SMK520 (1 Port)
7-Segment LED Indication :
You can press the button in order like mentioned-above diagram.
When you select one of four PC ports and this PC is shut down or this PC port is
disconnected to the PC, the selected port LED will flash. When you select one of four PCs
ports and this PC is powered on, the selected port LED is lit.
SMK580 (8 Port)
1 2 3 4 5 6 7 8
7-Segment LED Indication :
You can press the button in order like mentioned-above diagram.
When you select one of eight PC ports and this PC is shut down or this PC port is
disconnected to the PC, the selected port LED will flash. When you select one of eight PCs
ports and this PC is powered on, the selected port LED is lit.
SMK590 (16 Port)
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
7-Segment LED Indication :
You can press the button in order like mentioned-above diagram.
When you select one of sixteen PC ports and this PC is powered on, the selected port LED
is lit. When you select one of sixteen PC ports and this PC is shut down or disconnected a
PC, the selected port LED will flash.
Reset Button (
(Bank Select) and
(Port Select) ):
To press both “select” button and “bank” button of master bank simultaneously can reset
KVM switch. This reset action will not only return KVM switch back to initial state --- Check
the password, but also re-check all of slave banks which connected to mast KVM Switch.
If you add a new KVM Switch as a slave bank, please use reset button of master KVM
Switch to automatically assign a new ID to it. You can view this new slave bank go through
