Lamp On
To select
Lamp On
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
On
(Lamp on) or
Off
(Lamp off). Once selected, press the
ENTER
button to setup. Press and hold the
MENU
button about one second or wait for 30 seconds to exit the menu mode.
Lamp Power On
To select
Lamp Power On
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
On
(Lamp on when power on) or
Off
(Lamp off when power on). Once selected, press the
ENTER
button to setup. Press and hold the
MENU
button about one second or wait for 30 seconds to exit
the menu mode.
Firmware Version
To select
Firmware Version
, press the
ENTER
button and the display will show the version of
software of the unit. Press and hold the
MENU
button about one second or wait for 30 seconds to
exit the menu mode.
Defaults
To select
Defaults
, press the
ENTER
button to confirm. Use the
DOWN
/
UP
button to select
No
or
Yes
. Once selected, press the
ENTER
button to setup. Press and hold the
MENU
button about one
second or wait for 30 seconds to exit the menu mode.
Reset
To select
Reset
, press the
ENTER
button and all channels of the unit will return to their standard
position.
5.2 Home Position Adjustment
Press the
MENU
button for at least 3 seconds then press the
ENTER
button for at least 5 seconds
into offset mode to adjust the home position for the motors. Use
Up
and
Down
button to adjust the
value, press the
ENTER
button to setup. Back to the functions without any change press
MENU
button.
13C
