1. Safety Instructions
WARNING
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
All fixtures are intact from the manufacturer, please operate follow up the user manual,
artificial fault are not under guarantee repair.
Please unpack and check carefully that there is no transportation damage before using the
unit.
The unit is for indoor use only. Use only in a dry location.
Please install and operate by operator.
Please use safety chain when fixes the unit. DO NOT handle the unit by taking its head only,
but always by taking its base.
The unit must be installed in a location with adequate ventilation, at least 50cm from adjacent
surfaces.
Be sure to locate the unit in a place away from adjacent surfaces at least 1M.
Be sure that no ventilation slots are blocked, otherwise the unit will be overheated.
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Maximum ambient temperature TA: 40
℃
. DO NOT operate it where the temperature is higher
than this.
Unit’s surface temperature may reach up to 85
℃
. DO NOT touch the housing bare-handed
during its operation, and allow about 15 minutes for cooling the unit down before replacing
bulb or maintenance as it could be very hot.
DO NOT connect the device to any dimmer pack.
Please read the instruction carefully, it includes important
information about the installation, usage and maintenance
.
2C
