5-
4. Control Panel
○
1
Mains input:
Connect to power supply.
○
2
Fuse:
Protect the unit from damage of current.
○
3
Hanging bracket:
Fix mounting hook.
○
4
Heat sink for the LED:
do not cover this part to ensure proper cooling.
○
5
Optical lens:
Turn the lens to change the focus and obtain sharp gobos.
5. Troubleshooting
Following are a few common problems that may occur during operation. Here are some
suggestions for easy troubleshooting:
A. The fixture does not work, no light
1. Check the connection of power and main fuse.
2. Measure the mains voltage on the main connector.
B. No response to the sound
1. Make sure the fixture does not receive DMX signal.
2. Check microphone to see if it is good by tapping the microphone.
