Press the
MENU
button to exit.
— Color home position adjustment
To select the
, press the
ENTER
button to show the
COLOR OFFSET
on the display. Use the
DOWN
and
UP
button to adjust the value from -127 to 127, press the
ENTER
button to store.
Press the
MENU
button to exit.
4. How to Control the Unit
There are three ways to control the unit:
1. Master/slave built-in preprogram function
2. Easy controller
3. Universal DMX controller
No need to turn the unit off when you change the DMX address, as new DMX address setting will
be affect at once. Every time you turn the unit on, it will show “
” on the display and move
all the motors to their ‘home’ position and you may hear some noises for about 20 seconds. After
that the unit will be ready to receive DMX signal or run the built in programs.
4.1 Master/Slave Built In Preprogrammed Function
By linking the units in master/slave connection, the first unit will control the other units to give an
automatic, sound activated, synchronized light show. This function is good when you want an
instant show. You have to set the first unit in master mode
and select
(show 1),
(Show 2),
(Show 3) or
(show 4) mode. Its DMX input jack will have nothing
plugged into it, and its master LED will be constantly on and sound LED will flash to the music. The
other units will have to set in slave mode and select
(normal) or
(2 light show)
mode. Their DMX cables plugged into the DMX input jacks (daisy chain) and the slave LED lights
will be constantly on.
2-light show
13
