TILT INVERSION
To select the
, press the
ENTER
button to show the
TILT INVERSIO
on the display. Use the
DOWN
/
UP
button to select the
(normal) or
(tilt inversion) mode. Once the mode
has been selected, press the
ENTER
button to setup, to go back to the functions without any
changes press the
MENU
button again. Hold and press the
MENU
button for one second or wait
for one minute to exit the menu mode.
TEST
To select the
, press the
ENTER
button to show the
TEST
on the display and the unit will run
a self-test . To go back to the functions without any changes press the
MENU
button again. Hold
and press the
MENU
button for one second or wait for one minute to exit the menu mode.
TEMPERATURE
To select the
, press the
ENTER
button to show the
TEMPERATURE
on the display and the
display will show the temperature of the unit . To go back to the functions without any changes
press the
MENU
button again. Hold and press the
MENU
button for one second or wait for one
minute to exit the menu mode.
FIXTURE HOURS
To select the
, press the
ENTER
button to show the
FIXTURE HOURS
on the display and the
display will show the number of working hours of the unit . To go back to the functions without
any changes press the
MENU
button again. Hold and press the
MENU
button for one second or
wait for one minute to exit the menu mode.
SOFTWARE VERSION
To select the
, press the
ENTER
button to show the
SOFTWARE VERSION
on the display and
the display will show the version of software of the unit . To go back to the functions without any
11
