9D
functions without any change press the MENU button again.
Temperature Display
Select the
, press ENTER button and the display will show the temperature of
each unit
，
，
，
. To go back to the functions press the
MENU button.
Firmware version
Select the
, press ENTER button and the display will show the version of
software of the unit. To go back to the functions press the MENU button.
5. How To Control The Unit
You can operate the unit in two ways:
1. By manual controller
2. By DMX controller
No need to turn the unit off when you change the DMX address, as new DMX
address setting will be affected at once. Turn on the unit, if there is DMX or without
DMX and manual mode turn off, the LED will display the saved channel address
（
001-512
）
; If there isn’t DMX and manual mode turn on, the LED will display
saved manual address.
（
D000-D100
）。
