8
DOWN
/
UP
buttons to select
(LED on) or
(LED off) mode. Once the mode has
been selected, press the
ENTER
button to setup, to go back to the functions without any changes
press the
MENU
button again. Press and hold the
MENU
button for about one second or wait for
7 seconds to exit the current mode.
DISPLAY INVERSE
To select
, press the
ENTER
button to show
DISPLAY
on the display, and press the
ENTER
button again, it will show the
(inversion). To go back to the functions without any changes
press
MENU
button.
AUTO TEST
To select
, press the
ENTER
button to show
TEST
on the display and the unit will run a
self-‐test . To go back to the functions without any changes press the
MENU
button again. Press
and hold the
MENU
button for about one second or wait for 7 seconds to exit the current mode.
FIXTURE HOURS
To select
, press the
ENTER
button to show
FIXTURE HOURS
on the display and the display
will show the number of working hours of the unit . To go back to the functions without any
changes press the
MENU
button again. Press and hold the
MENU
button for about one second or
wait for 7 seconds to exit the current mode.
SOFTWARE VERSION
To select
, press the
ENTER
button to show
SOFTWARE VERSION
on the display and the
display will show the version of software of the unit . To go back to the functions without any
changes press the
MENU
button again. Press and hold the
MENU
button for about one second or
wait for 7 seconds to exit the current mode.
4. How To Control The Unit
You can operate the unit in three ways:
1. Master/slave built-‐in preprogram function
