6
4.2 Easy Controller
The CA-‐8 remote control is used only in master/slave mode. By connecting to the 1/4”
jack socket to the first unit you will find that the remote control will control all the
other units in Stand by, Function and Mode selection.
4.3 DMX Controller
When using a universal DMX controller to control the chain of units you have to set a DMX
address with Dip switches 1 to 9. Dip switch 10 is used to select channel mode, it’s ON means 1
channel mode and OFF means 3 channel mode. Please refer to the following diagram to address
your DMX 512 system using binary code.
DMX 512 Address Chart:
Dip-‐switches
# 1
# 2
# 3
# 4
# 5
# 6
# 7
# 8
# 9
#10
Value
1
2
4
8
16
32
64
128 256
CH mode
•
Examples:
1-‐CH mode: (Dip switch 10 ON)
Channel 1: dip / on: #1 (=1)
Channel 2: dip / on: #2 (=2)
Channel 3: dip / on: #1, #2 (1+2=3)
Channel 4: dip / on: #3 (=4)
Stand by
Blackout the unit
Function
1. Synchronous Strobe
2. Two light Strobe
3. Sound Strobe
Rotation Speed
1-‐8
Mode
Strobe (LED OFF)
Rotation (LED ON)
