5
6. FUSE (
T 6.3A
):
Protects the unit from over-‐voltage or short circuit;
7. POWER OUT:
Connects to the next unit;
8. POWER IN:
Connects to power supply;
4. How To Control The Unit
You can operate the unit in three ways:
1. Master/slave built-‐in pre-‐program function
2. Easy controller (optional CA-‐8)
3. Universal DMX controller
You do not need to turn the unit off when you change the DMX address, the new DMX address
setting will take effect immediately.
4.1 Master/Slave Built In Preprogrammed Function
The unit can be linked together in a daisy chain using as many units as you need in master/slave
mode to perform great built-‐in pre-‐programmed lighting shows triggered by music.
In Master/Slave mode refer to the DMX settings below:
Master unit: DMX start address MUST be set to 001. (First DIP switch = ON, all other are OFF)
Slave units: DMX start address may have any value but NOT 001 (example: set the first 3 DIP
switches to ON)
﹡
Dipswitch 2 “ON” has two functions:
1.
Performs the built-‐in pre-‐programs to the music.
2.
Auto mode: Eight Chase(In this mode press dip switch 3 and this will change the direction of
rotation, press dip switch 4,5,6 to change the speed)
﹡
2-‐light show
Dipswitch 10”off” means the unit works normally and “on” means inversion. In order to create a
great light show, you can set dip switch 10 ”on” on any unit that is linked to the master unit to get
contrast movement to the master unit even if you only have two units. Dipswitch 10 on the first
(Master) unit is no use for the 2-‐light show as it is the master unit that operates the light show.
