9A
Fix the fixture on a flat level surface (such as the ground or a wall):
1. Drill four expansion screw holes (for M12 expansion screws) on a flat level surface (such as the
ground or a wall) according to the size shown in Figure
①
.
2. As shown in Figure
②
, unscrew the washers and nuts of the expansion screws, and insert the
expansion screw tubes and screws into the drilled screw holes.
3. As shown in Figure
③
, align the holes on the brackets of the fixture with the four screws, then
put the washers and nuts of the expansion screws in turn and tighten them with a wrench.
4. After tightening the nuts, check whether the fixture is installed firmly, then adjust the fixture to
the required angle through the bracket knob.
Summary of Contents for FLANDINA 22 IP
Page 1: ......
Page 6: ...5A Dimension Weight 998x92x185mm 7kgs 39 3 x3 6 x7 3 in 15 4lbs Photometric Diagram ...
Page 12: ...11A ...
Page 43: ...42A ...