DMX Settings
To select
DMX Settings,
press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
DMX Address,
DMX Channel Mode, No DMX Status
or
View DMX Value.
DMX Address
To select
DMX Address
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to adjust the
address from
001
to
50
7
/3
87
, press the
ENTER
button to store. Press the
MENU
button back to
the last menu or let the unit idle One Minute to exit menu mode.
DMX Channel Mode
To select
DMX
Channel Mode
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button
to select
6
CH/1
3
CH/
18/
38
CH/
112
CH
/16CH/32CH/64CH
, press the
ENTER
button to store. Press
the
MENU
button back to the last menu or let the unit idle 30 seconds to exit menu mode.
No DMX Status
To select
No DMX Status
, press the
ENTER
button to confirm. Use the
UP
/
DOWN
button to select
BlackOut
(fixture blacks out if DMX signal stops) ,
Hold
(fixture continues to obey the last command
it received Via DMX if DMX signal stops)or
Manual
((When DMX signal is disconnected, the device
runs in manual mode), press the
ENTER
button to store. Press the
MENU
button back to the last
menu or let the unit idle 30 seconds to exit menu mode.
Fixture Settings
To select
Fixture Settings
, press the
ENTER
button to confirm, use the
UP
/
DOWN
button to select
Dimmer Curve,Dimmes Speed
or
White Balance
.
Dimming curve
To select
Dimming Curve
and press the
ENTER
button to confirm. Use the
UP/DOWN
button to
select linear, square rate, inverse square rate or S curve. After selecting the desired mode, press the
ENTER button to set and save. Press the
MENU
button to return, or wait one minute to return to the
main menu.
8
B
