13-
Mode 3&4&5:
6-
○
4 Microphone:
Receive music for the sound active.
○
5 Only for remote control:
By connect to the 1/4’’ microphone jack to control the unit for
Stand by, Function and Mode function.
○
6 DMX output:
For DMX512 link, use 3-pin XLR plug cable to link the next unit.
○
7 DMX input:
For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal
○
8 Mains output:
Connect to supply mains power for the next unit.
○
9 Mains input:
Connect to mains AC.
○
10 Safety Ring
: Keep the installation safe.
3.2 Main Function
To select any functions, press
MENU
button until the required one is shown on the display.
Select the function by
ENTER
button and the display will blink. Use
DOWN
and
UP
button to
change the mode. Once the required mode has been selected, press
ENTER
button to
setup or it will automatically return to the main functions without any change after idling one
minute. Back to the functions without any change press
MENU
button. The main functions
are shown below:
Summary of Contents for CP-21TC
Page 2: ...1...
