ACME COLOR PAR 64, User Manual

Page: 9 / 14

8A
B. Master/Slave operation
The fixtures will allow you to link 16 fixtures together and operate without a controller. In
Master/Slave mode, the first fixture will control the others to give an automatic, sound activated,
synchronized light show. This function is good when you want an instant show. The first unit it’s
DMX input cable will have nothing connect it, and the other fixtures will be set in slave mode
automatically. Their DMX input cables connect the last fixture DMX output cable (daisy chain). Any
fixture can act as a master or as a slave.
C. Easy Controller (By CA ‐ 8)
The easy remote control is used only in master/slave mode. There is a
terminator for connect the easy controller inside the fixture. By connecting the
cable into DMX IN waterproof cable gland to the CA ‐ 8terminator of the first
fixture, you will find that the remote control on the first fixture will control all
the other units for Stand by, Function and Mode. Built ‐ in lighting shows
triggered by Easy Controller:
Stand by Blackout the fixture
Function
Strobe
1. Synchronous Strobe in white
color
2. The same color chase
3. Different color strobe
9 Color select
White →
Red →
Blue →
Purple →
Orange →
Green →
Yellow →
Magenta →
Cyan
Color Chase
1.The same
color
2.Different
color
3.One light
chase
4.Two lights
chase
5. Four
lights chase
Color Fade
1. Fast speed
2. Middle speed
3. Slow speed
Mode
Sound 1(LED OFF)
Manual (LED ON)
Sound 2
(LED slow
blinking)
Auto (LED
fast blinking)