EN
GLISH
16
3D HELI MASTER
3D HELI Master
Content of the box
Please make sure the set is complete before using the helicopter for the first time*.
1x Helicopter Model Blizz 200 3D
1x Manual
1x Controller AC 2460H (mode 2)
1x Adaptor 110 – 220 V
1x Cross-head screwdriver
1 bag of screws
1 set of push rods: left, right, rear
1x LiPo battery charger, 3.7 V with balancer
2x LiPo Batteries 3.7 V 300 mAh 30C
2x push rod
* Before you can start using the helicopter, you need 8 batteries (AA) and a Micro SD memory card (min. 2 GB, max. 8 GB, Class 4). None
of these are included in the set.
Product description
You will find that the Blizz 200 3D is a one-of-a-kind ultra micro helicopter. Its advanced flybarless system and the three-axis gyroscope’s
precision greatly increase stability of the body. This, combined with its exceptionally lightweight frame, provides a level of power and
responsiveness that you have never experienced before. Inverted flight, loops, lips, rolls, funnels, wash pot – the Blizz 200 3D can do them
all and more, indoors and outdoors. If you are switching from a basic Cyclic Collective Pitch Mixing (CCPM) or fixed-pitch helicopters, you
will find the Blizz 200 3D to be a great model for getting used to flying more agile CCPM helicopters without having to spend lots of money
on expensive equipment or repairs.
Before your first flight, please take the time to read this manual carefully. It covers important preflight information that will help to make
your first flight a successful one.
