use the
UP/DOWN
button to select
Linear
,
Square Law
,
Inverse Squ.
or
S-curve
. Once selected,
press the
ENTER
button to store. Press the
MENU
button back to the last menu or let the unit idle
one minute to exit menu mode.
Linear:
The increase in light intensity appears to be linear as DMX value is increased.
Square Law:
Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law:
Light intensity control is coarser at low levels and finger at high levels.
S-cure:
Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select
Dimmer Speed
, press the
ENTER
button to show the
DIMMER SPEED
on the display.
Use the
UP/DOWN
button to select
Fast
or
Smooth
. Once selected, press the
ENTER
button to
setup. Press the
MENU
button back to the last menu or let the unit idle one minute to exit menu
mode.
LED Refresh Rate
To select
LED Refresh Rate
, press the ENTER button to show all the rates mode on the display.
Press the
ENTER
button to confirm, use the
UP/DOWN
button to select
the led refresh
rate .
(900HZ to 25000HZ)
Coolong Mode
To select
Coolong Mode
, press the ENTER button to show the
cooling mode
on the display.
Press the
ENTER
button to confirm, use the
UP/DOWN
button to select
Auto
,Slow or Fsat.
Display Setting
10C
Summary of Contents for Beluga
