1. Installation parallel to the plane
As shown in the figure, fix the clamp (B) on the hanger of the fixture by using screws and nuts (A)
and lock the clamp (B) on the truss.
2. Installation vertical to the plane
As shown in the figure, fix the clamp (C) on the splicing plate (A) of the fixture by using screws and
nuts (B) and lock the clamp (C) on the truss.
3. Multi-machine assembly
As shown in the figure, loosen the screws (A) of the splicing plate of the fixture. Then join the
fixtures together in pairs and move the splicing plate, tighten the screws and fix them on the two
fixtures; Fix the connecting plate (B) on the four corners of the fixtures by using screws and nuts so
that the fixtures are spliced and fastened to each other; Fix the clamp (D) on the splicing plate of
the fixture by using screws and nuts (C) and lock the clamp (D) on the truss.
6B
Summary of Contents for ANIMA C
Page 1: ......
