ACME AE-610 BEAM, User Manual, Page: 9 / 20

minute to exit the menu mode.
Sound Sense
To select Sound Sense , press the ENTER button to show the SOUND SENSE on the display. Use the
DOWN / UP button to adjust the value from 0 to 100 . Once the mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Press and hold the MENU button about one second or wait for one minute to exit the menu
mode.
Pan Inverse
To select Pan Inverse , press the ENTER button to show the PAN INVERSE on the display. Use the
DOWN / UP button to select the Inverse (pan inversion) or Normal (normal) mode. Once the mode
has been selected, press the ENTER button to setup, to go back to the functions without any
change press the MENU button again. Press and hold the MENU button about one second or wait
for one minute to exit the menu mode.
Tilt Inverse
To select Tilt Inverse , press the ENTER button to show the TILT INVERSE on the display. Use the
DOWN / UP button to select the Inverse (tilt inversion) or Normal (normal) mode. Once the mode
has been selected, press the ENTER button to setup, to go back to the functions without any
change press the MENU button again. Press and hold the MENU button about one second or wait
for one minute to exit the menu mode.
Back Light
To select Back Light , press the ENTER button to show the BACK LIGHT on the display. Use the
DOWN / UP button to select the On (LED display always on) or Off (LED display off when not use).
Once selected, press the ENTER button to setup, to go back to the functions without any change
press the MENU button again. Press and hold the MENU button about one second or wait for one
minute to exit the menu mode.
Auto Test
To select Auto Test , press the ENTER button and the unit will run self-test by built-in program. To
go back to the functions press the MENU button again. Hold and press the MENU button about
one second or wait for one minute to exit the menu mode.
8A