background image

Re-install the air duct.

1.  Place the air duct over the processor sockets.
     The front edge of the air duct should contact the fan
     module and the top of the installed air duct should be
     flush with the top surface of the power supply.
2.  Use caution not to pinch or disengage cables that may 
     be near or under the air duct.  
 

6

Replace the Net-Net 2620 top cover.

1.  Place the cover over the chassis so that the side
     edges of the cover sit just inside the chassis 
     sidewalls.
2.  Slide the cover forward until it clicks into place. 
3.  Insert the shipping screw (B) at the center of the 
     top cover using the Phillips screwdriver. 
4.  Re-install the power cord and return the system 
     to its rack location.
5.  Reconnect network cables.

7

Note the slot numbering at the back of the system.
See the Post Installation notes below.  

Net-Net 2620 
full-height slots

Net-Net 2620 
half-height slots 

1

2

3

4

5

6

Note:  Slot 1 is not present in the Net-Net 2620.

8

Net-Net

®

Network Interface Card (NIC) Installation (cont.)

Post installation notes:

1. The Ethernet port numbering depends on the number of NICs that are installed. Port

 

numbering runs left to right and progresses from top to bottom when viewing the back 
of the system. 

2. NICs maintain their port numbering and MAC addressing after initial NN2600
software installation.

3. When relocating a NIC from a half-height slot to a full-height slot, the orientation of the
card will be reversed in the new full-height slot installation. This means that the port 
numbering from the original installation will be reversed in the new slot.

4. Adding new NICs after the initial installation will result in new port numbers that begin 
using the highest port number plus 1. For example, if the highest port number is eth11, the 
first port number on the newly added card, regardless of the slot, will be eth12. 

 

  

Net-Net OS-E

Net-Net 26260 Network Interface Card (NIC)

Installation

2010 Acme Packet, Inc.

All rights reserved.

Acme Packet

100 Crosby Drive

Bedford, MA 01730 USA

t 781-328-4400

f 781-275-8800

http://www.acmepacket.com

Last Updated: December

2010

Proprietary & Confidential

Reviews: