Page 9 / 26
DTUS066 rev A1 March 21, 2012
III.2.4 WLAN Activity
Flashing BLUE
when there is activity on WLAN (sending or receiving)
or during the search for a Wi-Fi access point (only in "Bridge Mode")
III.2.5 WLAN Strength
Only available in "Bridge Mode" (4 leds OFF in "Access Point Mode")
4 leds
GREEN
to indicate the strength of Wi-Fi signal:
- 4 ON : Excellent signal
- 1 ON : Poor signal
During initialization, these leds flash one after other to indicate the start
of the product.
III.2.6 Ethernet 100/1000
OFF
when Ethernet connection is negotiated in
10
MBit/s
GREEN
when Ethernet connection is negotiated in
100
MBit/s
YELLOW
when Ethernet connection is negotiated in
1000
MBit/s
Available at the same location either directly on the board (for TTL
version) or on the RJ connector (for RJ version)
III.2.7 Ethernet Link/Activity
Fixed GREEN
when link is established with another Ethernet product
Flashing GREEN
when there is activity on Ethernet (sending or
receiving)
Available at the same location either directly on the board (for TTL
version) or on the RJ connector (for RJ version)
