Setup the IP addresses according to the illustration below.
From each PC, run a command prompt and execute the ping command to
verify the link.
From PC 1 : type
ping 192.168.1.2,
verify the answer returned by PC2
« Answer from 192.168.1.2 … »
From PC 2 : type
ping 192.168.1.1,
verify the answer returned by PC1
« Answer from 192.168.1.1 … »
Notice :
The Diag & Wlan Tx/Rx LED are flashing while the bridge is not connected to
the AP.
WLan Tx/Rx LED is flashing blue for WLAN Tx or Rx activity.
-4-
