Ackermann Instrumente GmbH
•
Eisenbahnstr 65-67
•
78604 Weilheim Germany
Tel. : +49-7461-96617-0
•
Fax. : +49-7461-96617-70
•
email.: info@ackermanninstrumente .de
Side 30of 33
5.12
PRECAUTIONS
Please pay attention to the followings when you use this TFT/LCD module
with Back-light unit.
1)You must mount Module using mounting holes arranged in 4 corners.
2) Be sure to turn off the power when connecting or disconnecting the circuit.
3) Note that the polarizers are easily damaged. Pay attention not to scratch or press this
surface with any hard object.
4) When the LCD surface become dirty, please wipe it off with a soft material.
(ie.cotton ball)
5) Protect the module from the ESD as it may damage the electronic circuit (C-MOS).
Make certain that treatment person’s body are grounded through wrist bend.
6) Do not disassemble the module and be careful not to incur a mechanical shock that might occur during installation. It
may cause permanent damage.
7) Do not leave the module in high temperatures, Particularly in areas of high humidity for a long time.
8) The module not be expose to the direct sunlight.
9) Avoid contact with water as it may a short circuit within the module.
