10
FP function
LOCK function
5s
5s
Turbo
The unit will operate at high fan speed (while
compressor on) with temperature automatically
set to 8 C/46 F.
Note:
This function is for heat pump air conditioner only.
2
+
Press together
Turbo
button and
Humidity
button at the
same time more than 5 seconds to activate Lock function.
All buttons will not response except pressing these two
buttons for two seconds again to disable locking.
Sleep Function
Press Sleep button
Sleep
The Sleep function is used to decrease energy use while
you sleep(and dont’t need the same temperature settings
to stay comfortable). This function can only be activated
via remote control.
For details, see “Sleep operation” in OWNER’S MANUAL
of the machine.
Note:
The Sleep function is not available in FAN or DRY
mode.
Press this button 2 times during one second under HEAT Mode and setting temperature of
16 C to activate FP function. Press On/Off, Sleep, Mode, Fan and Temp. button while operating
will cancel this function.
Humidity
Lifting panel function
3s
3s
+
Press together
Mode
button and “ ” button at the
same time more than 3 seconds to activate this function,
and the remote controller displays "F2".When setting the
panel status, press the “ ” or “ ” buttons of the
remote controller to control the rise or fall of the grille,
and press any other button to exit the setting.
