Operation
43
6.2
Start
1.
Start the laser marking device in accordance with the operating instructions.
2.
Press the
Close door
button to initialize the workstation.
3.
When the workstation is started up for the first time, you need to enter the settings
for the external units in the software.
You will find more detailed information in the software manual.
6.3
Handling
The laser marking device is operated via the marking software.
All operating sequences are controlled from the control PC via the laser control interface
of the laser marking device.
All the parameters are exclusively entered on the keyboard of the control computer.
This also applies to operation with the optional equipment, the rotary module and the Y-
table.
NOTICE
Keep to the switching sequence on each start.
WARNING
RISK OF INJURY FROM MOVING AXES!
When working with the door open, do not touch the axes!
NOTICE
The door closing sequence is aborted if there is an obstruction in the range of motion.
!
Summary of Contents for Workstation COMFORT
