background image

WARRANTY INFORMATION

Limited Warranty Statement

Air Concepts Industries, Inc., warrants that your Griffin is free from
defects in materials and workmanship for a period of one year from the
original date of purchase by the initial owner. (For guns used for rental,
the warranty is limited to three months.) During this period, any defec-
tive parts will be repaired or replaced with new, or at the option of Air
Concepts Industries, Inc., refurbished parts. All parts replaced under this
warranty become the property of Air Concepts Industries, Inc.

User installable parts will be replaced upon receipt by us of the defective
part and proof of purchase identifying initial gun purchase date and serial
number. Otherwise, your gun must be shipped prepaid to us, with proof
of date of purchase. You are responsible for shipping your gun, or gun
parts to us, and for insuring against loss during shipping. For detailed
instructions on obtaining warranty service and an R.A. number call ACI
at 909-350-9176. Any return without a R.A. number will be refused.

Exclusion and Limitations

This warranty does not extend to the cup seal or O-rings, nor to any
parts, such as air bottles or adapters, which are not manufactured by Air
Concepts Industries, Inc., nor to any parts made defective by accident,
misuse, abuse, or modification.

Except as expressly stated herein, Air Concepts Industries, Inc., makes no
warranties, express or implied, including but not limited to any implied
warranties of merchantability or fitness for any purpose beyond that for
which the Griffin was designed. This warranty gives you specific legal
rights. You may have other rights which vary from state to state.

Air Concepts Industries, Inc., shall not be liable for any incidental or
consequential damages arising from the use of the Griffin or from the
breach of the warranty set forth herein.

THE SPORT OF PAINTBALL

The sport of paintball involves games in which opposing players attempt
to shoot each other with dye-filled projectiles called “paintballs”.
Paintball is a serious sport which makes rigorous demands on players’
physical and mental abilities. When played in a safe manner, it can pro-
vide a rewarding experience not available in any other sport.

There are hazards in any active sport such as paintball. Serious injuries
are rare, but do occur.

A 0.68 caliber paintball moving at high velocity adds a special dimension
of hazard to paintball sports. At a minimum, it can cause pain and a
bruise. It can break the skin and cause bleeding. If it strikes an unprotect-
ed eye, ear, or mouth it can cause blindness, deafness, or even death. If it
strikes a young child in a sensitive body area, it can cause crippling or
death. This is why proper safety gear for players, isolation of spectators
from the play area, and proper handling of paintball guns are absolutely
essential.

The importance of always following safety rules, and the risk of serious
injury, require an adult level of maturity when using paintball guns. This
is why sale of the Griffin is limited to individuals 18 years of age and
older.

The information in this manual is subject to change without notice. It
is not a commitment on the part of Air Concepts Industries, Inc. We
reserve the right to improve and change products with no obligation
to modify products previously sold.

16

Summary of Contents for GRIFFIN

















Reviews: