9
- Group operation and stop
•
Execution: Keypad 1-6 + GROUP
•
Stop: GROUP or Joystick
If you try to stop the group of working dome camera, press “Group”
button or control joystick.
Move speed: Moving speed from A to B. (64=High, 1=Low)
Dwell time: Standby time before starting.
- All group clear
Press the button of CLR for a while (more then 3sec)
Ü
Group
Ü
ENT
8) Tour
This function is binding 6 groups into one tour, and fulfilling of continual
group working.
Picture 8-1
Picture 8-2
Picture 8-3
- Set tour mode starting
-SET
Ü
TOUR
- Tour setup
¬
Using numeric keypad, setup group number 1-6, Input group with
pressing ENT button.
-
When adding group number, repeat the process of
¬
®
Press “SET” button when finishing the set of tour
- Tour operation and stop
Execution:
TOUR
Stop: TOUR or Joystick
- All tour clear
Press CLR button for a while (more then 3sec)
Ü
TOUR + ENT
9) Spiral Function
Keypad 7 + MENU +
ON/OFF
This function will be supported only at speed dome camera: the fixed
pan speed and tilt speed is operated at the same time that can make a
spiral function.
10) PTZ trace
The controller is made to meet to the function in speed dome camera.
This function makes to memorise
P/T/Z movement for about 120
seconds and play that trace movement.
Picture 10-1
Picture 10-2
- Practising and stop of PTZ trace
Keypad 8 + MENU + ON (Practicing)/OFF (Stop)
- Memory of PTZ trace
Keypad 9 + MENU + MENU+ ON (Memory)/OFF (Delete)
When manipulating according to this rule, the message of ”Trace
Memory” appears on the monitor. At this moment, It can operate pan
and tilt by joystick.
If the time expire, the memorising stop automatically and memorised
PTZ is registered.
11) Camera Remote Reset
Keypad 1-255 + CAM + Keypad 10 + MENU + ENT
This is same as the action switching power on, and doesn’t influence
preset data.
-SET TOUR-
Group No? 1-6
Camera:001
Input?
n
[MAIN]
-SET TOUR-
Group No? 1-6
Camera:001
Save-1
-SET TOUR-
Group No? 1-6
Camera:001
Save-6
-CCTV TRANSMITTER-
Trace ON/OFF? 1-6
n
Camera:001
Input? 8 [MAIN]
-CCTV TRANSMITTER-
Trace Set/Delete?
n
Camera:001
Input? 9 [MAIN]
