achilles A23S Owner'S Handbook Manual Download Page 20

Page: 20 / 94

(1) Code No. RB238-5737-1

(2) Code No. RC418-5737-2

(3) Code No. TC030-4958-1

(4) Code No. RC108-5754-1

1BAAAAQAP0860

CARE OF DANGER, WARNING AND CAUTION LABELS

(1)

Keep danger, warning and caution labels, clean and free from obstructing material.

(2)

Clean danger, warning and caution labels with soap and water, dry with a soft cloth.

(3)

Replace damaged or missing danger, warning and caution labels with new labels from your
ACHILLES dealer.

(4)

If a component with danger, warning and caution label (s) affixed is replaced with new part,
make sure new label (s) is (are) attached in the same location (s) as the replaced
component.

(5)

Mount new danger, warning and caution labels by applying on a clean dry surface and
pressing any bubbles to outside edge.

Summary of Contents for A23S































































































Search results

Summary of Contents for A23S

Reviews:

Related manuals for A23S

Brands by name

Popular brands

achilles A23S, Owner'S Handbook Manual

Search results

Summary of Contents for A23S

Reviews:

Related manuals for A23S

Brands by name

Popular brands